① Time/Data Set Button

Set time, display format and temperature unit

Short press when the device is off to enter system settings.
You can set the year, month, day, 12/24-hour format, hour, minute, and temperature unit.

Auto-save after 1 minute of no operation.
If no button is pressed for 1 minute, the device will automatically save the current settings and exit.

② Light Color Button

Adjust decorative light colors

Short press when the device is off to change the light color.
The light color cycles through orange-red, blue, and mixed mode.

Press the Power button to save.
After choosing the light color, press the Power button to save and turn off the device.

Auto-save after 3 seconds of no operation.
Light color settings are only available when the device is off.

③ Daily Memory Button

View the complete sleep record of the previous day

Press when the device is off to view previous daily records.
Each press shows an earlier record, from newest to oldest.

Stores up to 99 records.
When the memory is full, the oldest record will be deleted automatically.

Shows AVG and MAX data.
The screen first shows average data, such as breathing rate, heart rate, deep sleep time, sleep quality, and emotional index. Then it shows maximum data, such as highest heart rate, breathing rate, and movement.

④ Last Memory Button

View the most recent sleep record lasting at least 30 minutes

Press when the device is off to view the most recent sleep record.
This function shows the previous sleep session lasting more than 30 minutes.

Press repeatedly to browse records.
Records are shown from newest to oldest.

⑤ Power/Data Review Button

Power on/off, interrupt memory upload, manually check values during monitoring

Short press to power on.
When the device is off, press once to turn it on. The air cell will inflate automatically and the device will start detection.

Long press for 2 seconds to power off.
When the device is on, press and hold for 2 seconds to turn it off.

Short press during monitoring to view data.
During monitoring, press once to manually check the latest measured values, such as resting heart rate, resting breath rate, and ambient temperature.

3.Battery & Charging

Use the provided Type-C cable for charging. During charging, the battery icon will show a scrolling light effect. When fully charged, the battery icon on the controller will remain steadily lit.

Battery life can last up to 57 hours when used without being plugged in. For stable long-term use, we recommend using the device while connected to power when possible.

When the battery level is low, the battery icon will appear or flash. If the battery becomes too low, the device will automatically turn off to protect the system. Low battery levels may affect monitoring reliability, so please recharge promptly.

4.Placement Guidelines

Place VitalTrack on a flat surface. Avoid uneven or sloped areas to help ensure reliable monitoring results.

Do not place blankets, thick pads, or other items on top of VitalTrack, as this may affect sensing performance.

Use the product in a dry indoor environment. Avoid exposure to moisture or high temperatures.

5.Basic Operation

VitalTrack is designed to start monitoring automatically after the device is powered on and your pet lies calmly on the mat. After startup, the air cell inflates automatically, and the device enters detection mode. If a stable pet-on-mat signal is detected, the system will begin monitoring and display measured values such as resting heart rate, resting breath rate, and ambient temperature.

Main Operating Modes:

① Detection Mode

The device starts up, inflates automatically, and begins detecting whether your pet is on the mat.

② Eco Mode

The device continues monitoring with reduced screen brightness to save power. Values may update automatically every 60 seconds when valid signals are detected.

③ Sleep Mode

A deeper power-saving mode. The device checks periodically whether your pet is present and wakes when needed.

Data Recording

Sleep quality and emotional index require stable resting conditions for a sufficient duration, such as at least 40 minutes.

Need more details?

You can view or download the full user manual below. For a better reading experience, we recommend viewing the full manual on a computer or tablet.